Skip to content

If you want to beautify your home, tiling is a great option. Just by tiling properly, you can change the look of your house. It is the first thing that people usually notice. So if you have done your patio work and floor work it is certainly going to impress your guests. But if you haven’t then here, we are with five simple steps to do your Outdoor Tiling Gold Coast project that will blow everyone’s mind. If you follow these steps, we guarantee you a beautiful looking patio work.

Outdoor patio tiling job done in Gold Coast with slate tiles

Steps to DIY an Outdoor Tiling Gold Coast Project? 

In the following points below, we are going to tell you the five steps that will lead to a beautiful looking patio work. So get ready to learn. 

Step #1: Purchase of material 

Before starting the job, the first thing you have to do is to buy the right kind of material and tiles for the Outdoor tiling project. As the outdoor tile faces rough weather throughout the year, it is essential to choose the correct tile for this job. We will use either porcelain or stone tiles in this project. The reason behind it is that these types of tiles can withstand any rough weather. Although it will cost a bit more, it will last for a more extended period.  

Before the purchase, you have to calculate the number of tiles that you would need to complete the work. Measure the surface area where we are thinking of doing the work. When you get the area in a square meter, divide it with the area of a single tile. The number you get by dividing is the number of tiles required to finish the job. 

Step #2: Cleaning of the surface  

Before beginning our outdoor tiling Gold Coast project, the first thing, you have to do is clean the surface. There should be no debris left on the surface. Vacuum the surface. Use a self-levelling screed to fill up the cracks and holes you see on the surface. The levelling screed will also make the surface even. It is imperative to make the surface even before starting to tile. An uneven surface cannot drain the water properly.  Also, remember to chop the door a little bit from the bottom as the floor surface will rise after the tiling work. So it is much better to do it early.  

Step #3: Mixing the adhesive 

You will find two types of adhesives in the market. They are pre-mixed and cement-based adhesives. In the Outdoor Tiling Gold Coast project, we will use the cement-based adhesive. To prepare the adhesive, we need cement and additive. Mix them with the help of a paddle mixer to make a paste. Remember that the adhesive dries fast. So make small batches of adhesive. The consistency of the adhesive paste should be like toothpaste. 

Step #4: Fixing the Tiles 

Now the complicated part of the project starts. You have to be careful after making a small batch of adhesive use it to fix 3 to 4 tiles at a time. Apply adhesive in generous quantity. Fix the tiles and check that they are at the same level. If one tile is not at the same level as the adjacent tiles, then pick up the tile and apply more adhesive if it is lower than the adjacent tile. If it is higher, then remove some adhesive.  

Use spacer between to tiles. We need spaces between the tiles for doing the grouting work later. Clean the adhesive if it is over the tiles simultaneously. If you don’t clean, it will be harder for you to remove it later.  

For this outdoor tiling Gold Coast project, all we need is a trowel to spread and groove the adhesive properly. Use the trowel at a 45-degree angle. It will help to spread the adhesive, even higher. Use the smooth part of the trowel to spread the adhesive and the notched part to make grooves in it. Keep in mind that the adhesive should not be filled in the spaces between the tiles.  

If a little haze remains on the tiling surface, clean it with the help of a 50-50 solution of vinegar and water. It will make your tiles shiny and clean. 

Step #5: Fill the gaps using Grouts 

The spaces between the tiles are filled with grout. The process is known as grouting. Grout is softer than adhesive. It helps us to manage the stress developed during the tiling movement. Adhesive cannot cope with the stress, so grout that is softer is used to do the job. In this Outdoor Tiling Gold Coast project, we are going to use sanded grout.  

To do the grouting, we need sanded grout, additive, two buckets, afloat, sponge, water, and towel. 

So let’s begin the work. 

Mix the sanded grout and additive in a basket with the help of a spade. Use a float to spread the grout in the spaces between the tiles. Fill the spaces. There should be no hole in the grouting. If holes remain after the work, it will develop efflorescence. So be careful. Do remember to remove the spacers before doing the grouting. Clean the excess grout while doing the grouting with the help of a damp sponge.  

After taking the utmost care, you will still find a haze over the tiles. Use a very damp sponge and give it a good rubbing. The grout will come out, leaving your tile clean.  

You will also be able to finish the whole tiling work in one to two days. It very much depends on the size of the job that you are doing.  

Conclusion 

Patio tiling project completed by our tiling professional in Gold Coast with travertine tiles

Though it is a complicated job, it will give you satisfaction after you finish the work. Follow all the steps mentioned above to do the outdoor tiling Gold Coast Project. It will undoubtedly help you to finish the work with ease. Take the best tiles and additives from the market. If you need to know a bit more or have any doubts, reach us through our comment box below. 

Leave a Comment